CBP 2 Finished Build Pictures

Hi Fellas,my offering for the comp',both junkers to begin with.
1st.the conservative gasser.







2nd.the not half bad Lindberg '40





[/quote]

Johan Heavenly Hearse - For some reason I always wanted this kit - I tried to make this as box stock as possible .The lilac spray paint is from a craft store and then clear coated. I was able to reuse all the glass; the butterflies and bumper stickers on them cover up the little glue spots the original builder left. Most of the trim was covered with Bare Metal Foil. The decals on the curtains you may recognize as the ones from the Zinger reissues ;I never though I would find a use for them ! LOL. The decals are originals from Ebay as are the resin landau bars which were painted with Alclad. The extra surfboard I had in my parts stash so its sits in the back instead of a coffin.

This was another Ebay gluebomb . When I won it the build didn't look too bad, but when it arrived it was really a mess- the motor was heavily glued in wrong, the rear seat was glued shut and the axles were broken. It took more then a few hours to cut the windshield out of the brittle frame . I took the rear seat apart, filed a groove across it and made some pins so it would spin. The door panels were put in wrong so I had to file the lower edges down and add a top piece to both so the hatch would shut right . All the wheels were drilled out as the axles were broken; Hotwheels Bob hooked me up with another builder who sent me some useable parts . Most of the chrome was painted with Alclad spray . Because of all the glue damage I couldn't save the green plastic, so I painted it in Testor's Sublime green. The decals are reproductions from Billy Gooche and were a good quality decal .